Expert Answers about Ford Bronco II

• Installing a 7-Way Connector and Brake Controller On a 1988 Ford Bronco II for Towing
• To tow a trailer with trailer brakes you will need a 6-Way or 7-Way connector depending on which style of connector is on the trailer you will be purchasing. I would recommend going with the 7-Way connector, which can be used with an adapter, item # 47549, if the trailer has a 6-Way connector installed on it. You will need a 4-Pole Hardwire Kit Including Circuit Tester, item # 18252, and a Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, for this installation. Even though your...
  view full answer...


• Availability of Trailer Hitch for 1986 Ford Bronco II
• Thanks for your question about the Curt Trailer Hitch, part # C13011. This hitch is a confirmed fit for your 1986 Ford Bronco II and has a bolt-on installation with no welding required. You will, however, need to drill four 17/32" holes through the frame rails per the installation instructions. The complete hardware kit and installation instructions included. If you plan on doing some towing you will want the following parts: Wiring kit # C59236 Ball mount # D-4 Hitch Pin and Clip, #...
  view full answer...